Please use this identifier to cite or link to this item: https://repositori.uma.ac.id/handle/123456789/12123
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorSiahaan, M Yusuf R-
dc.contributor.advisorMahadi, Batu-
dc.contributor.authorZaki, Muhammad-
dc.date.accessioned2020-09-10T04:08:04Z-
dc.date.available2020-09-10T04:08:04Z-
dc.date.issued2020-05-04-
dc.identifier.urihttps://repositori.uma.ac.id/handle/123456789/12123-
dc.descriptionadapun tujuan rancang bangun alat bantu buka pasang roller idler pada belt conveyor ini adalah melakukan kegiatan tugas akhir yang berupa perancangan alat mulai dari merencanakan desain dan material konstruksi, proses pembuatan alat hingga menguji keterfungsian alat. Alat ini digunakan saat terjadinya perawatan/perbaikan dan pergantian roller idler pada belt conveyor. Alat ini berfungsi untuk mempermudah dan mengefisiensikan waktu saat proses buka dan pasang roller idler pada belt conveyor. Alat ini dirancang sesimple mungkin agar mudah dibawa ke lokasi kerja. Metode dari perancangan alat ini memiliki beberapa tahapan, mulai dari perencanaan persiapan bahan, literarture, pembuatan hingga pengujian keterfungsian dari alat batnu tersebut. Sebagian besar bahan dari komponen alat in imenggunakan besi hollowr ST.37. Beban input berasal dari berat batu bara, belt dan komponen alat ini sendiri. Tegangan yang terjadi pada penyangga belt sebesar 0.74 N/mm2, pada penyangga atas sebesar m2 dan pada penyangga bawah sebesar 0.0018854943 m. Tegangan yang terjadi masih jauh dari kriteria kegagalan sturktur. Demikian juga dengan defleksi yang terhadi sangat kecil sehingga alat aman digunakanen_US
dc.description.abstractAs for the purpose of designing the tool for opening the idler roller plug on this conveyor belt is to carry out the final project activities in the form of designing tools starting from planning the design and construction materials, the process of making tools to testing the functioning of the tools. This tool is used when there is maintenance / repair and replacement of the idler roller on the conveyor belt. This tool serves to simplify and streamline the time during the process of opening and installing the idler roller on the conveyor belt. This tool is designed to be as simple as possible for easy portability to the job site. The method of designing this tool has several stages, starting from planning the preparation of materials, literacy, manufacturing to testing the functionality of the batnu tool. Most of the components of this tool use ST.37 hollowr iron. The input load comes from the weight of the coal, the belt and the components of the tool itself. The stress that occurs on the belt support is 0.74 N / mm2, the upper support is m2 and the lower support is 0.0018854943 m. The stress that occurs is still far from the criteria for structural failure. Likewise, the deflection that occurs is very small so that the tool is safe to used.en_US
dc.language.isoiden_US
dc.publisherUniversitas Medan Areaen_US
dc.relation.ispartofseriesNPM;178130102-
dc.subjectalat bantuen_US
dc.subjectroller idleren_US
dc.subjectconveyoren_US
dc.subjectassisted equipmenten_US
dc.subjectroller idleren_US
dc.subjectconveyoren_US
dc.titleRancang Bangun Alat Bantu Buka Pasang Roller Idler Pada Belt Conveyoren_US
dc.title.alternativeDesign and Build Tools to Open the Idler Roller on the Belt Conveyoren_US
dc.typeThesisen_US
Appears in Collections:SP - Mechanical Engineering

Files in This Item:
File Description SizeFormat 
178130102 - Muhammad Zaki - Chapter IV.pdf
  Restricted Access
Chapter IV3.03 MBAdobe PDFView/Open Request a copy
178130102 - Muhammad Zaki - Fulltext.pdfCover, Abstract, Chapter I,II,III, Bibliography13.55 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.